A professionally engineered High-Quality,Heavy Duty,Light Weight, Plug and Play the six amateur radio bands 20-17-15-12-10-6 meters broadband hexagonal beam wire antenna.
- - All the band’s purchased ready to install no tuning needed.
- - 100% repeatability .
- - Heavy duty centre hub (6mm) and
centre post – corrosion resistant aluminium 6063-T832 and 7005 , made
in Poland. new model 2015
- - Professionally double Flange from magnesium-very strong, made in England.
- - Professionally Fibreglass Spreader-very strong.
- - Professionally Wire -made in Furukawa Electric Japan or Lapp Kabel Germany.
- - Professionally steel screws ,dial ,S-hooks and all connection -Stainless steel HQ -1H18N12T -made in Germany.
- - Professionally 2mm and 3mm diameter high strength Kevlar guy line.UV resistant – made in Switzerland.
- - Professionaly Heavy duty polyamide element block clamps ,certificate Qualitas – made in Belgium.
- - Professionaly Performance and Exellent Work-Design-GUARANTEE !
- - Professionaly connection wire elements M5 -Haupa Germany
- - Center post 100% water tightness
- - Lifetime Warranty !
- - 1:1 balun ferrite-optional.
- - Light weight full assembled-less than-MARK II HD(9kg) and MARK II Light(8kg),can be rotated with a light duty rotator .
- – Light enough for pushup mast
- - The transportation box length is only 145cm x 28cm x 14cm
- - The small turn radius ,the simple wire only multiband concept.
- - The adjustable mount will accomodate masts up 35mm -tipical.
- - Works -and it performs well even when mounted in the clear only 20-25 feet above the ground ,condition- no any close obstructions.Antenna works best at heights around 35ft or more.
- - SWR low across each bands .1:2 typical.
- - Color and numeric codes spreader/spraed plates for easy of setup.
- - Gain and front/back,gain to a comparable two elem. yagi typical.
- - Power legal limit,tested 1500W.
- - Wind surface area tested over 120km/h.
- - Symmetrical shape will withstand wind better than other antenna designs
- -Just Plug and play beam- read for action.No tuning required.
- - 12 funnel teflon inside centre post
- - Total estimated time required -one person max 1Hrs.
- - OS 239 connector installed to attach your feed line from your transceiver.
- - N type socket-optional
- - 35mm pipe aluminium lower mast.
- - Illustrated step-by-step construction manual.(English lang,Spanish lang,French lang)
- HEXBEAM MARK II HD – ideal solid antenna
HEXBEAM MARK II LIGHT – ideal dx-peditions antenna